Setting Menu Entries, General - Fronius Primo 3.0-1 Instructions De Service

R e l a y
Example: "WiFi Access Point" menu item
Exiting an entry
G R A P H
If no key is pressed for 2 minutes:
-
-
-
Setting menu
1
entries, general
2
3
The available settings are displayed:
4
5
The inverter switches from wherever it is on the menu level back to the "NOW" dis-
play mode (exception: "Standby" Setup menu entry),
The display backlighting goes out.
The amount of power currently being fed in is displayed.
Open the desired menu
Use the 'Up' or 'Down' keys to select the desired menu item
Press "Enter"
Use the 'Up' or 'Down' buttons to
select the desired setting
Press the 'Enter' key to save and
apply the setting.
To discard the setting, press the 'Esc'
key.
3 Use the "Up" and "Down" keys
between the available entries
4 To exit a menu entry, press the "Back"
key
The menu level appears
The first digit of a value to be set
flashes:
Use the 'Up' or 'Down' keys to select
4
a value for the first digit
5 Press "Enter"
The second digit of the value flashes.
Repeat steps 4 and 5 until ...
6
the whole value to be set flashes.
7 Press "Enter"
Repeat steps 4 - 6 as required for
8
units or other values that are to be
set until the appropriate unit or the
value flashes.
Press the 'Enter' key to save and
9
apply the changes.
To discard the changes, press the
'Esc' key.
to scroll
23