Usb Stick For Updating The Inverter Software; Removing The Usb Flash Drive - Fronius Primo 3.0-1 Instructions De Service

Masquer les pouces Voir aussi pour Primo 3.0-1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USB symbol on the inverter display, e.g. in display mode 'NOW':
Note! Please note for outdoor applications that conventional USB flash drives are often
only guaranteed to work within a restricted temperature range.
For outdoor applications ensure that the USB flash drive also functions, for example, at
low temperatures.
USB stick for
With the help of the USB stick, end customers can also update the inverter software via
updating the
the USB item on the SETUP menu: the update file is first saved to the USB stick, from
inverter software
where it is then transferred to the inverter. The update file must be saved in the root dir-
ectory on the USB stick.
Removing the
Safety instruction concerning the removal of a USB flash drive:
USB flash drive
40
N O W
A C O u t p u t P o w e r
If the inverter detects a USB flash drive,
the USB symbol will appear in the top right
corner of the display.
When inserting a USB flash drive, check
whether the USB symbol is displayed (it
may also flash).
IMPORTANT! To avoid any loss of data,
a USB flash drive may only be removed
if the following conditions are met:
-
Only remove a USB flash drive via
the 'Safely remove USB / HW' item
on the SETUP menu
-
The 'Data transmission' LED has
stopped flashing or comes on
steady.

Publicité

Table des Matières
loading

Table des Matières