Time / Date; Display Settings - Fronius Galvo 1.5-1 208 Instructions De Service

Time / Date

Setting of the time, the date, and the automatic daylight saving time adjustment
Setting range
Set time
Set the time (hh:mm:ss or hh:mm AM/PM – depends on the Time display format settings)
Set date
Set the date (dd/mm/yyyy or mm/dd/yyyy – depends on the Date display format settings)
Time display format
Setting range
Factory setting
Date display format
Setting range
Factory setting
Daylight saving time
Activate / deactivate automatic daylight saving time adjustment
Setting range
Factory setting
IMPORTANT! The time and date must be correct to ensure that the daily and yearly values
and the daily characteristics are displayed correctly.

Display Settings

Setting range
Language
Setting the display language
Setting range
28
For setting the format in which the time is displayed
For setting the format in which the date is displayed
NOTE! Only use the function for automatic daylight saving time adjustment when
there are no LAN or WLAN-compatible system components in a Fronius Solar Net
ring (e.g., Fronius Datalogger Web, Fronius Datamanager).
If LAN or WLAN-compatible system components are found, adjust this setting on
the system component web interface.
Set time / Set date / Time display format / Date display format /
Daylight saving time
12 / 24 hour clock
Depends on the country setup
mm/dd/yyyy / dd.mm.yy
Depends on the country setup
on / off
on
Language / Night mode / Contrast / Illumination
German, English, French, Dutch, Italian, Spanish, Czech, Slo-
vak, etc.