Time/Date; Display Settings - Fronius Primo 3.8-1 208-240 Instructions De Service

Time/Date

Setting the time, date and automatic adjustment for daylight saving time
Setting range
Set time
Setting the time (hh:mm:ss or hh:mm am/pm, depending on the setting under Time display
format)
Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under Date display
format)
Time display format
For specifying the format in which the time is displayed
Setting range
Factory setting
Date display format
For specifying the format in which the date is displayed
Setting range
Factory setting
Daylight saving time
Activating/deactivating the automatic adjustment for daylight saving time
Setting range
Factory setting
IMPORTANT! The time and date must be set correctly for day and year values to be dis-
played properly.

Display Settings

Setting range
Language
Setting the display language
Setting range
28
Set time / Set date / Time display format / Date display format /
Daylight saving time
12 hrs / 24 hrs
depends on the country setup
mm/dd/yyyy / dd.mm.yy
depends on the country setup
NOTE! Only use the function for automatic daylight savings adjustment when
there are no LAN or WLAN-compatible system components in a Fronius Solar Net
Ring (e.g., Fronius Datalogger Web, Fronius Datamanager or Fronius Hybrid-
manager).
If there are LAN or WLAN-compatible system components, set this function on
the web interface for the system component.
on/off
on
Language / Night mode / Contrast / Illumination
German, English, French, Dutch, Italian, Spanish, Czech, Slo-
vak, etc.