How To Connect The Open Collector Input Of The Controller - Agilent Technologies TPS-compact 969-8217 Notice De Mode D'emploi

17 Technical Information
Interconnections
How to Connect the Open Collector Input of the
Controller
Here below there are the typical connections of the open collector
input of TPS-compact to an external system. Two cases are
considered:
1.
2.
Please note that on the connector a 24 Vdc, 30 mA voltage, a
GROUND signal and the open collector pin are available.
Figure 32
232/262
the customer supplies the 24 Vdc
the customer does not supply the 24 Vdc.
Case 1
TPS-compact User Manual / 87-901-010-01 (C)