Signal Description - Agilent Technologies TPS-compact 969-8217 Notice De Mode D'emploi

Tab. 5
Pin N.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Signal Description

START/STOP: input signal to start or stop the pump. Without the
supplied cover connector the turbomolecular pump automatically
starts, if you want to stop the turbo-pump from outside, you have to
connect the START/STOP (+) signal to the +24 Vdc pin and the
START/STOP (-) signal to the GROUND pin (this is the default
configuration of the cover connector).
INTERLOCK: input signal to control the pump rotation. With the
supplied cover connector the IN-TERLOCK (+) signal is connected to
the +24 Vdc pin and the INTERLOCK (-) signal to the GROUND pin; in
this condition the pump is stopped.
TPS-compact User Manual / 87-901-010-01
Signal name
START/STOP (+)
START/STOP (-)
INTERLOCK (+)
INTERLOCK (-)
SPEED SETTING (+)
SPEED SETTING (-)
SOFT START (+)
SOFT START (-)
+24 Vdc I = 30 mA
max
NORMAL OUTPUT (relay)
V = 125V I = 200 mA
max max
PROGRAMMABLE SET POINT
NORMAL OUTPUT
FAULT OUTPUT
PROGRAMMABLE ANALOG SIGNAL (+)
GROUND

PROGRAMMABLE ANALOG SIGNAL (-)

(C)
Technical Information
Interconnections
Input/Output
IN
IN
IN
IN
IN
IN
IN
IN
OUT
OUT
OUT
OUT
OUT
OUT
OUT
227/262
17