Corghi ARTIGLIO UNIFORMITY Manuel D'utilisation page 105

Avoid Personal Injury. Carefully read, understand and follow the warnings and instructions
given in this manual. This manual is an essential part of the product. keep it with the machine
in a safe place for future reference.
4. Never exceed the bead setting pressure provided by the
tyre manufacturer, as stated on the sidewall of the tyre.
Watch the pressure gauge on the air line continuously.
5. If tyres being mounted require more than the tyre manu-
facturer's maximum bead seating pressure and , the wheel
should be removed from the tyre changer, placed in an infla-
tion cage, and inflated per manufacturer's instructions.
6. Using inflation devices (e.g. inflation guns) connected to
compressed air sources other than the machine is not per-
mitted.
7. Never place your head or any part of your body over a tyre during the inflation process or
when attempting to seat beads. Using this machine does not prevent the risk of tyre or air line
explosion or wheel failure.
8. Always stand back from the tyre changer when inflating, never lean over.
An exploding tyre and rim may be propelled upward and outward with enough force to cause
serious injury or death.
do not mount a tyre if its dimensions (indicated on the tyre wall) do not match the wheel
dimensions (printed inside the wheel) exactly, or if the wheel or tyre are defective or damaged.
Never exceed the tyre pressure recommended by the tyre manufacturer.
This tyre changer is not a safety device and will not restrain exploding tyres and rims. keep
unauthorised persons away from the working area.
9. Crushing hazard. Moving Parts Present. Contact with moving parts could result in an accident.
• Only one operator may work with the machine at a time.
• Keep all bystanders clear of tyre changer.
• Keep hands and fingers clear of rim edge during demounting and mount-
ing process.
• Keep hands and fingers clear of mount/demount head during operation.
• Keep hands, feet and other body parts away from moving parts.
• Do not use tools other than those supplied with tyre changer.
• Use proper tyre lubricate to prevent tyre binding.
• Pay attention while moving tyre/rim or lever.
Artiglio Uniformity User Manual
CAUTION!
DANGER
EN
105