Corghi ARTIGLIO UNIFORMITY Manuel D'utilisation page 139

d
6.5. dEMOUNTING PROCEdURE
Positioning the tool
A- Move the head into its working position (control
1, Fig. 36).
If necessary, compress the tyre to make enough
space to insert the tool.
B- Release the tool by pulling
the button (2, Fig. 36) outwards
C- For the tool to be positioned correctly, the
insert (3, Fig. 37) must be against the edge of the
wheel where the vertical wall begins.
D- Press the button (2, Fig. 36) to
lock the tool in position.
Engaging the top bead
A- Continue to apply pressure on the tyre
with the bead breaker disc (Fig. 38) to create
the space necessary to slew the demount-
ing tool.
B- Operate the control
the demounting tool
Artiglio Uniformity User Manual
d
(Fig. 39) to slew
d
35
2
1
36
EN
3
37
A
38
139