Corghi ARTIGLIO UNIFORMITY Manuel D'utilisation page 162

At the end of the measurement cycle, the machine displays the following values:
- radial run-out of the inner tyre bead seat on the rim
- radial run-out of the outer tyre bead seat on the rim
Press the 'graphs' button
to print a report of the measurements made (if an approved printer is connected).
Note: the moving vertical bar shown in the graphs represents the vertical axis in the
3 o'clock position.
- enter the tyre load index and press 'next'
- mount the tyre (in inverted position relative to direction of rotation), on the wheel,
inflate the tyre to 2.4 bar and press 'next'
- lift the turntable rotation pedal (to turn wheel in anticlockwise direction) and wait for
the rim measurement cycle to complete,
- press the turntable rotation pedal (to turn wheel in clockwise direction) and wait for
the rim measurement cycle to complete,
- mount the tyre (in correct position relative to direction of rotation), on the wheel, inflate
the tyre to 2.4 bar and press 'next'
- lift the turntable rotation pedal (to turn wheel in anticlockwise direction) and wait for
the rim measurement cycle to complete,
- press the turntable rotation pedal (to turn wheel in clockwise direction) and wait for
the rim measurement cycle to complete.
At the end of the measurement cycle, the machine displays the following values:
162
to view the graphs of the values measured; press 'print'
,
,
,
Artiglio Uniformity User Manual