Corghi ARTIGLIO UNIFORMITY Manuel D'utilisation page 134

A - Fit the most suitable cone for the central hole of the wheel on the shaft.
B - Place the wheel on the lift.
C - Press the pedal (1) to lift the wheel.
D - Transfer the wheel manually onto the turntable, then lower the lift with the pedal (2).
E - When placing the wheel on the turntable, align the shaft correctly with the centre hole
of the wheel, and align the adjustable pin on the edge of the turntable with one of
the wheel stud holes on the wheel.
Clamping the wheel on the turntable (fig.25)
A
C
134
Artiglio Uniformity User Manual
B
d
25