Maintenance - Corghi ARTIGLIO UNIFORMITY Manuel D'utilisation

Control out of operation.
➥ Check pedal unit.
Rises slowly or has insufficient force.
➥ Check for bent hoses.
➥ Adjust air connections of pedal unit.
➥ Replace the valve on the wheel lift control unit control device.
Cylinder leaking air.
➥ Replace cylinder gasket.
➥ Replace cylinder.
The spare parts handbook does not imply that the user is authorised to perform
procedures on the machine that are not specifically described in this user manual,
and is solely intended to allow the user to provide the technical support service with
precise information to minimise response times in the event of a query.

10. MAINTENANCE

Any operation intended to modify the setting valve of the relief valve or pressure
limiter is forbidden. The manufacturer declines all liability for damage resulting
from tampering with these valve
Before adjusting or servicing the machine, disconnect the electricity and
compressedair supplies and ensure that all moving parts are suitably
immobilised.
do not remove or alter any part of this machine (only technical assistance
personnel is permitted to do so).
Artiglio Uniformity User Manual
The wheel lift is not working
CAUTION!
CAUTION!
CAUTION!
CAUTION!
EN
167