Rizzoli STP Série Manuel D'utilisation page 85

Picture 4 - Predisposition of the flue outlet (STP).
This connector has a tolerance of about 1 cm
to make the installation easier. The toleran-
ce is available according to a single direction
Picture 5 - Tolerance for flue outlet on the top and back. The tolerance depends on the orientation of the connector.
2.6 FIXING THE EXTERNAL OVEN (OPTIONAL)
For STP SF it is possible to connect to the de-
vice an external oven to be placed upon the
thermal cooker. The oven must be fixed on
the rear wall. It is necessary that the wall is
able to sustain the weight of the oven and
that it is made in not heat sensible materi-
als. It must be respected the same safety dis-
tance of the thermal cooker.
Before fixing the oven it is necessary to re-
move the internal part of the oven as indi-
cated in pictures 31 and 32, in order to be
able to fix it correctly.
which depends on the orientation of the con-
nector (see picture 5).
Y
+/-
10 mm
To fix the oven, insert the apposite connect-
ing pipe and place the oven downwards so
that it is perfectly aligned with the superior
flue outlet of the thermal cooker. Then, fix
the oven on the wall so that it is perfectly
horizontal and the connecting pipe is per-
fectly inserted. The correct insertion must
guarantee the holding of the fume conduct
and the correct inside the fume circuit of the
oven.
The fixing on the wall must be done with 5
screws: 3 on the upper edge and 2 inside the
83
X
+/-
10 mm