Rizzoli STP Série Manuel D'utilisation page 105

5.11 TELESCOPIC PULLOUT FOR BAKING PAN (STP)
All the wood fired thermal cookers with
oven have a telescopic pullout for endowed
baking pan system. In this way, it is possible
to extract the baking pan without the ne-
cessity to sustain it, ensuring a better prac-
Picture 29 - Instructions for the variation of the position of the telescopic pullout.
5.12 PLATE COVER
On every thermal cooker it is possible to
use, on demand, a stainless steel plate cov-
er, made to cover the plate in the periods in
which the thermal cooker is not used. In this
way you obtain an uniform desktop. The
ticality. The telescopic pullout is placed in a
single position inside the oven but this can
be changed by moving it in the lowest part
or in the middle-upper and upper position.
To make this, see picture 29.
plate cover must be used with cold thermal
cooker. Before placing it, be sure that is not
present humidity, that the plate is clean and
that all the necessary maintenance is done.
103