Rizzoli STP Série Manuel D'utilisation page 108

Picture 33 - Removal of the connecting pipe of the external oven.
6.5 CLEANING THE VISIBLE PARTS
Stainless steel parts have to be cleaned cold
with neutral detersives or with a specific
solution for stainless steel in case of hard
to remove dirt. Do not use at all abrasive
sponges that may scratch the surface. Dry
with a soft rag, following the glazing wise.
In some cases, after the installation or af-
ter the cooking of meals, it might appear a
superficial oxidised stratus, in particular on
the stainless steel frame. Also in this cases,
6.6 CLEANING OF THE GLASSES
The glasses of oven and fire doors may be
washed with normal products in commerce.
The internal part of the fire door has been
made to clean itself during the use of the
WARNING! Do not clean the door before waiting for his cooling. Sudden
changes in temperature may cause the breaking of the glass.
1
an accurate cleaning will make the cooker
as new.
On request Rizzoli gives specific products to
clean stainless steel. For enamelled or paint-
ed parts, do not use abrasive and aggres-
sive or acid detersives. In case of stains pour
some oil and wait while it absorbs the halo,
then clean with a soft rag. We recommend
not to use solvents or denatured alcohol on
painted parts.
thermal cooker. Anyway, sometimes you
could have to clean this part also. For this,
you have to remove the internal glass un-
screwing the 4 screws that block it.
106
2