Rizzoli STP Série Manuel D'utilisation page 83

2.1 GENERAL NOTES
The thermal cooker must be installed by ex-
perienced people according to the specific
technical laws. In particular it is important
to pay attention to the connection to an ap-
propriate heating system and to the chim-
ney, which must be suited and dimensioned
according to the device.
Also the connection to AC power must be
done in order to power up the control unit,
the circulation pump and to make the oven
light working when it is available. When
placing the thermal cooker, you must pay
attention to prevent damages. Do not drag
the thermal cooker, move it keeping it lifted
from the floor. The thermal cooker must not
be moved making effort on the handrail or
on the handles. In case of furniture near the
thermal cooker, be sure to maintain the min-
imal safety distances in case of inflammable
Model Sideways
STP
STP SF
Table 1 - Safety distances from inflammable or sensible to temperature materials.
2.2 CHIMNEY
Chimney has a main importance for the
correct working of a wood fired thermal
cooker. The thermal cookers work at their
best only if the chimney matches the build-
ing laws. Call an experienced technician or
2.3 DIMENSIONS AND CORRECT FORMS OF CHIMNEY
Chimney must match the existing laws. It
is recommendable to have a chimney di-
ameter of 16 cm if you have a rise of the
exhaust-pipe longer than 6 m. It is recom-
mendable to have a chimney diameter of
18 cm if you have a rise of the exhaust-pipe
longer than 4 m and shorter than 6 m. The
2. INSTALLATION
Rear
20 cm 20 cm
25 cm 25 cm
materials or sensible to high temperatures
as written in table 1. In case of floor made
of inflammable materials it is necessary to
put a fire-proof protection on the floor in
front of the fire door. The protection must
extend for a minimum of 50 cm in front and
for a minimum of 30 cm sideways over the
fire door.
In case of thermal cookers to be enclosed
near not heat sensible materials, it is neces-
sary to maintain a minimum distance of 1-2
mm to allow the expansion of the materials
when the temperature changes.
Front
80 cm
80 cm
a local chimney-sweeper for every problem
dealing the chimney, the exhaust-pipe and
connection with the thermal cooker.
connection to a flue shorter than 4 m is not
allowed. The thermal cooker must not be
connected to a shared flue, moreover the
connection should be linear as more as pos-
sible, without horizontal parts (see picture
2).
81
Above
70 cm
70 cm