Time-Delayed Measurement; Bluetooth - TOOLCRAFT LDM-70BT Mode D'emploi

» The device begins emitting audible signals when you are approx.
10 cm away from the next measuring point. The signal interval
increases the closer you come. When you reach the measuring
point, a steady audible signal sounds and the symbol
appears.
8. You can now move toward the next target distance.
p) Time-delayed measurement
The device features a time-delayed measurement function. After a set
time runs down, the measurement is taken automatically.
1. Turn on the device.
2. Push the
3. Use the buttons
60 seconds). Push and hold the buttons for quicker incrementing.
4. The time-delay function activates automatically 2 seconds after input
and the measurement is taken after the timer runs down.
» An audible signal sounds after each second and simultaneously
briefly interrupts the laser beam. The last two remaining seconds
are indicated with two audible signals.
13. Bluetooth®
The device features Bluetooth
devices. However, to this end an app on your external device is required.
1. Push and hold the
display, the Bluetooth
activated.
» To turn off the Bluetooth
for approx. 1 second. The Bluetooth
the display.
2. Refer to the help menu of your external device or its software to learn
more about connection and use.
64
key (17). The display shows the timer symbol.
and
for data interchange/control via external
®
button (17) for approx. 1 second. On the
symbol appears to indicate the function is
®
®
to set the timer in seconds (max.
function, push and hold the button
symbol disappears from
®