Batteries - TOOLCRAFT LDM-70BT Mode D'emploi

The product is equipped with a class 2 laser. Laser signs in different
•
languages are included in the package. If the sign on the laser is not
written in the language of your country, please affix the appropriate
sign onto the laser.
• Caution – if operation settings or procedures other than those
described in these instructions are used, it could lead to exposure
to dangerous radiation.
c) Batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for
a long period of time to avoid damage through leaking. Leaking or
damaged batteries might cause acid burns when in contact with
skin, therefore use suitable protective gloves to handle corrupted

batteries.

• Batteries must be kept out of reach of children. Do not leave batteries
lying around, as there is risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and
new batteries in the device can lead to battery leakage and device
damage.
• Batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk of
explosion!
43