Tyre Changer Description; Technical Data; Accessories Included With The Machine; Optional Accessories Supplied On Request - Mondolfo Ferro TBE155 Manuel D'utilisation

TYRE CHANGER
DESCRIPTION
This machine is electro-hydraulically operated,
with exclusive technologies patented by the
manufacturer.
It works on any type of integral wheels (drop
centre and with a side ring) with the maximum
dimensions and weights indicated in the TECH-
NICAL DATA paragraph.
The machine is solidly constructed and has
relatively reduced dimensions in comparison to
its operative capacity. It holds the wheel in a
vertical position and is activated by the operator
by means of a special radio control.

TECHNICAL DATA

- Maximum width.......................2450 mm
- Maximum depth.......................2300 mm
- Maximum height........................1550 mm
- Gear unit motor .......................1.3 - 1.85 kW
- Hydraulic pump motor...................1.5 kW
- Machine weight..............................762 kg
- Wheel dimensions ..from 14" to 46" (56" with PA)
- Maximum wheel diameter.............2300 mm
- Maximum wheel weight....................1000 kg
- Maximum wheel length............1065 mm
- Oil tank capacity...........................15 l
- wheel lifter cylinder capacity........1600 Kg
- Noise level:
• A-weighted sound pressure level (L
working position... < 70 dB (A)
The noise levels indicated correspond to emis-
sion levels and do not necessarily represent safe
operating levels. Although there is a relationship
between emission levels and exposure levels,
this cannot be used reliably to establish whether
or not further precautions are necessary. The
factors which determine the level of exposure
to which the operator is subject to include the
duration of the exposure, the characteristics
of the workplace, other sources of noise, etc.
The permitted exposure levels may also vary
according to the country. However, this informa-
tion will enable machine users to make a more
accurate assessment of hazard and risks.
44
INCLUDED WITH THE
- Rim pliers
The locking grip, when fixed firmly to the rim
edge prior to mounting, makes it easier to lift
the tyre, insert it into the rim well and keep
it in position.
- Bead lifting lever
The bead lifting lever keeps the bead in posi-
tion on the tool when demounting agriculture
wheels.
- Side ring lever
The side ring lever is used to make it easier to
remove the side rings from the earthmoving
wheels that use them.
- Grease gun
The grease gun is used for the monthly greasing
recommended for all moving machine parts.
ACCESSORIES SUPPLIED
Please refer to the relevant accessories cata-
logue.
) at the
pa
SPECIFIED CONDITIONS
The tyre changer was designed exclusively for
tyre mounting and demounting.
Any use other than those described in this
manual is to be considered improper and
unreasonable.
The manufacturer does not intend the machine
to be used for inflation operations. If the opera-
tor decides to proceed with partial bead inser-
ACCESSORIES
MACHINE
OPTIONAL
ON REQUEST
OF USE
WARNING
DANGER
- Operator's manual TBE 155
- E
nglIsh