INFORMATION ABOUT
DEMOLITION
If the machine is to be scrapped, remove all
electrical, electronic, plastic and metal parts
and dispose of them separately in accordance
with current provisions as prescribed by law.
ENVIRONMENTAL INFORMATION
The disposal procedure described below only
applies to machines with the symbol of the waste
bin with a bar across it on their data plates.
This product may contain substances that can
be hazardous to the environment and to human
health if it is not disposed of properly.
We are therefore providing you with the informa-
tion below in order to prevent these substances
from being released into the environment, and
to improve the use of natural resources.
Electrical and electronic equipment must never
be disposed of in the usual municipal waste but
must be separately collected for their proper
treatment.
The crossed-out bin symbol, placed on the
product and on this page, reminds the user
that the product must be disposed of properly
at the end of its life.
Thus, the hazardous consequences that non-
specific treatments of the substances contained
in these products, or improper use of parts of
them, may have on the environment or on hu-
man health are prevented. Furthermore, this
helps to recover, recycle and reuse many of the
materials contained in these products.
Electrical and electronic manufacturers and dis-
tributors set up proper collection and treatment
systems for these products for this purpose.
At the end of the product's working life, contact
your supplier for information about disposal
procedures.
When you purchase this product, your sup-
plier will also inform you that you may return
another worn-out appliance to him free of
charge, provided it is of the same type and
has provided the same functions as the product
- E
- Operator's manual TBE 155
nglIsh
just purchased.
Any disposal of the product performed in a
different way from that described above will
be liable to the penalties provided for by the
national regulations in force in the country
where the product is disposed of.
Further measures for environmental protection
are recommended: recycling of the internal and
external packaging of the product and proper
disposal of used batteries (only if contained in
the product).
With your help, we can reduce the amount of
natural resources used to produce electrical
and electronic equipment, minimise the use of
landfills to dispose of old products, and improve
quality of life by preventing the discharge
of potentially hazardous substances into the
environment.
RECOMMENDED FIRE
EXTINGUISHING
EQUIPMENT
For the choice of the most suitable extinguisher,
see the following table.
Materials
Liquids
dry
inflammable
Water
YES
Foam
YES
YES
Powder
YES*
YES
CO2
YES*
YES
WARNING
This table contains general instructions to be
used as guidelines for the users. All the appli-
cations of each type of extinguisher must be
obtained from the relevant manufacturer.
Equipment
electric
NO
NO
NO
YES
YES
67
UK