Télécharger Imprimer la page

Tyre Changer Description; Technical Data - Mondolfo Ferro TB125 Manuel D'utilisation

Publicité

Les langues disponibles
  • FR

Les langues disponibles

decals have come off or are damaged, replace-
ments can be obtained from your nearest
manufacturer dealer.
- Observe the unified industrial accident preven-
tion regulations relating to high voltages and
rotating machinery whenever the machine is
in use or being serviced.
- Any unauthorised alterations made to the
machine automatically release the manufac-
turer from any liability in the case of damage
or accidents attributable to such alterations.
Specifically, tampering with or removal of
the machine safety devices is a breach of the
regulations relating to Safety at Work.
WARNING
During work and maintenance operations, always
tie back long hair and do not wear loose clothing,
ties, necklaces, wristwatches or any other items
that may get caught up in the moving parts.
WARNING
Keep unauthorised persons away from the
working area (Fig. 7).
1500
WARNING
Before performing any service operations on
the hydraulic system, position the machine in
the resting mode with the turntable bar low-
ered and the turntable completely closed.
- E
- User Manual TB125
nglIsh
This machine is electro-hydraulically operated
with exclusive technologies patented by the
manufacturer.
It works on any type of integral wheels (drop
centre and with a side ring) with the maximum
dimensions and weights indicated in the TECH-
NICAL DATA paragraph.
The machine is solidly constructed and has
relatively reduced dimensions in comparison to
its operative capacity. It holds the wheel in a
vertical position and is activated by the operator
by means of a special radio control.
- Maximum width..........................2220 mm
- Maximum depth.........................2000 mm
- Maximum height.........................1220 mm
- Gear unit motor (3ph/1ph)..........1.5/1.8 kW
- Hydraulic pump motor (3ph/1ph)...1.1/1.3 kW
- Machine weight.............................555 kg
- Rim measurements..............from 14" to 26"
- Maximum wheel diameter .............1600 mm
- Maximum wheel weight..................700 kg
- Maximum wheel width...................780 mm
- Oil tank capacity ..............................12 l
- Wheel lifter cylinder capacity ...... 1200 kg
- Noise level:
• A-weighted sound pressure level (L
working position... < 70 dB (A)
2000
The noise levels indicated correspond to emis-
sion levels and do not necessarily represent safe
operating levels. Although there is a relationship
between emission levels and exposure levels,
this cannot be used reliably to establish whether
or not further precautions are necessary.
The factors which determine the level of
7
exposure to which the operator is subject
to include the duration of the exposure,
the characteristics of the workplace, other
sources of noise, etc. The permitted exposure
levels may also vary according to the country.
However, this information will enable machine
users to make a more accurate assessment of
hazard and risks.
TYRE CHANGER
DESCRIPTION

TECHNICAL DATA

) at the
pa
43

Publicité

loading