Publicité
Les langues disponibles
Les langues disponibles
Fit the arm with the control console on the
column (see Fig. 4E).
Remove the string binding the two elements of
the arm.
Fasten the console cable to the column with
the clamps, routing the cable on the inner side
(see Fig. 4F).
INSTALLATION
WARNING
Take the utmost care when unpacking, as-
sembling, lifting and setting up the machine
as indicated below.
Failure to comply with these instruction may
damage the machine and risk the operator's
- E
- Operator's manual TBE 155
nglIsh
safety.
Remove the original packaging materials after
positioning them as indicated on the packaging
and keep them for possible future shipping.
Installation clearances
WARNING
Choose the place of installation in strict ob-
servance of local regulations regarding safety
in the workplace.
The floor must be able to support a load equal
to the sum of the weight of the equipment
plus the maximum load allowed, taking into
4E
consideration also the resting base and any
fixing means envisaged.
Position the machine in a manner that guarantees
access to all four sides. In particular, check the
minimum space required for the work indicated
in Fig. 5:
- at the rear for wheel loading and unloading;
- at the front to be able to view the work being
performed.
IMPORTANT: for correct, safe use of the equip-
ment, we recommend a lighting level of at least
300 lux in the place of use.
1500
4F
UK
5
41
Publicité
Chapitres
