This machine must be used only by qualified and authorised personnel. A qualified operator is construed as a person
who has read and understood the manufacturer's instructions, is suitably trained, and is conversant with safety and
adjustment procedures to be adhered to during operations. Operators are expressly forbidden from using the machine
under the influence of alcohol or drugs capable of affecting physical and mental capacity.
The following conditions are essential:
- The operator must be able to read and understand all the information in this manual.
- Make sure you have a thorough knowledge of the capabilities and characteristics of this machine.
- Keep unauthorised persons well clear of the area of operations.
- Make sure that the machine has been installed in compliance with established legislation and standards.
- Make sure that all machine operators are suitable trained, that they are capable of using the machine correctly and
that they are adequately supervised during their work.
- Never leave nuts, bolts, tools or other equipment on the machine to avoid the risk that they could become entrapped
between moving parts during work.
- Do not touch power lines or the inside of electric motors or other electrical equipment until the power has been
disconnected and locked out.
- Read this manual carefully and learn how to use the machine correctly and safely.
- Always keep this user manual in a place where it can be readily consulted when working with the machine and consult
it whenever you are in need of confirmation or explanations.
WARNING
Do not remove or deface the safety Danger, Warning or Instruction decals. Replace any missing
or illegible Danger, Warning or Instruction decals. Missing or damaged decals can be obtained at
your nearest Mondolfo Ferro dealer.
- When using and carrying out maintenance on the machine observe the unified industrial accident prevention
regulations for high voltage industrial equipment.
- Any unauthorised alterations made to the machine automatically release the manufacturer from any liability in the case
of damage or accidents attributable to such alterations. Specifically, tampering with or removing the machine's safety
devices is a breach of the regulations for industrial accident prevention.
WARNING
When operating or servicing Mondolfo Ferro equipment do not wear ties, loose fitting clothes,
necklaces or wristwatches and any other articles that could become entrapped by moving parts.
Tie back long hair or cover with a scarf or a cap.
The AS 933, AS 943 and AS 944 are electro-pneumatic tyre changers.
The machines are designed to mount and demount tyres on all types of integral wheels with drop centre and weights
and dimensions as described in the heading TECHNICAL BRIEF.
The machine is solidly constructed. It operates with the wheel in a vertical position for bead breaking and horizontal for
mounting and demounting tyres. All machine movements are controlled by the operator by means of the pedals.
DESCRIPTION OF TYRE CHANGERS
27