Publicité
How to use the Temperature Controller
Using the Circulation Function (with Override)
(Refer to "Circulati n Func on (with Timer) sec on on previous page for informati n on setti
The "OVERRIDE" func on can be used with or without the 'TIMER" opera on feature.
Without "TIMER" opera on
-"OVERRIDE" func on can be used to manually activate circula on by pressing the "OVERRIDE/SELECT"
bu on on the controller.
- To deac vate the "OVERRIDE" functi n press the "OVERRIDE/SELECT"
will deacti ate automa cally after 2 hours.)
With "TIMER" opera on
-"OVERRIDE" func on can be used to temporarily alternate the programmed circula on ("TIMER") setti .
-Press the "OVERRIDE/SELECTION"
Example: When the "OVERRIDE/SELECTION" bu on is pressed at 2:30PM, the grids from 2:00PM-5:00PM
will come "ON" and light up.
-The "Override" functi n is e ectiv only once and will disengage automa cally on the next med se ng
sequence. For example in the above case, at 6:00PM, the 2:00PM-5:00PM grids will turn off automa cally and
the circula on will now be "OFF".
-The "OVERRIDE" func on can be deac vated in the following ways:
1. Press "OVERRIDE/SELECT" during the "Override" functi n to cancel it and return to the original setti .
2. Deac va ng the "TIMER" functi n.
3. Turning the controller "OFF".
66
bu on during a "TIMER" operati n.
Press "OVERRIDE/SELECT"
KBP Series Manual
the timer.)
again. ("OVERRIDE" func on
Publicité
