Publicité
Determining Vent Confi urati n (contin ed)
Twin Pipe PVC/CPVC Config ration
(3"or 4")
Intake Cap to be removed and discarded
for twin pipe PVC/CPVC con gura on.
Removal of Intake Cap
1. Remove the fastener from intake connec on.
2. Remove the intake cap.
Intake Gasket Connec on
Exhaust Gasket Connec on
KBP Series Manual
3. Install the intake pipe. Ensure it is properly
seated.
4. Secure the intake pipe to the unit with the
supplied screw (in the carton box).
5. Install the exhaust pipe. Ensure it is properly
seated.
6. Secure the exhaust pipe to the unit with the
supplied screw (in the carton box).
WARNING
DO NOT apply PVC glues, solvents, or cleaners
to the water heater's intake or exhaust gasket
connec ons. Failure to correctly assemble the
components according to these instruc ons
may result in property damage, personal injury,
or death.
17
Publicité
