Publicité
How to use the Temperature Controller
The MC-195T controller is the standard temperature controller that is supplied with the water heater. It is
provided in the packaging of both indoor and outdoor models.
DO NOT repeatedly operate the water heater and then use a hot water tap while the controller is turned o .
Opera ng the water heater in this way to alternately produce hot water may cause water to condense on the
outside of internal parts and accumulate in the water heater cabinet.
PRIORITY Icon
CIRCULATION Icon
TEMPERATURE Icon
COMBUSTION Icon
TIMER SETTING Icon
TIMER 1 & 2 Icon
ON/OFF Icon
Temperatures Available with a Controller
The water heater can deliver water at only one temperature setti
provided below. A temperature lower than 98° F (37° C) can be obtained at the tap by mixing with cold water.
Fahrenheit °F
Celsius °C
*
Temperature setti s from 125-140 °F (52-60 °C) are available by setti
models have a default maximum temperature of 120° F (49° C) and an op on (SW6) to increase the
maximum temperature to 140 °F (60 °C).
WARNING
DO NOT adjust the other switches unless speci cally instructed to do so.
These temperatures are suggesti ns only:
TIME Icon
Temperature Se ngs Available
98
100
102
104
37
38
39
40
Kitchen 120 °F (49° C)
Shower 98 - 110 °F (37 - 43 °C)
KBP Series Manual
LOCK Icon
LOCK Bu on
at a me. The available temperatures are
106
108
110
115
41
42
43
46
Dedicated Return Mode
SW6 in DIPSW 1 to ON. These
Operati n Light
ON/OFF Bu on
FUNCTION Bu on
WATER TEMPERATURE
Butt n
PRIORITY Bu on
TIMER Bu on
OVERRIDE/SELECT Bu on
120 125* 130* 135* 140*
49
52
54
57
Cross Over Mode
60
61
Publicité
