How to use the Temperature Controller
Adjusti g Timer Se
1. With the controller "ON", press the "TIMER"
bu on to display the se ngs for "TIMER 1".
2. Press the "FUNCTION" bu on.
The "TIMER 1" icon and grid of the current ti e
will flash.
When the flashing grid is blank the pump
programming will be inac ve at that time frame.
"OFF" will be displayed under the "TIMER 1" icon.
When the flashing grid is illuminated the pump
programming will be ac ve at that time frame.
"ON" will be displayed under the "TIMER 1" icon.
(The following example demonstrates setti
gs
1" to acti ate the pump from 7 AM-9 AM instead of
6 AM-8 AM)
3. Use the "UP" or "DOWN" bu on to select the time
frame (6:00 AM-7:00AM) to be adjusted.
Press "UP" to move the grid clockwise.
Press "DOWN" to move the grid counter-clockwise.
4. Press the "OVERRIDE/SELECT" bu on.
"ON" icon will turn to the "OFF" icon.
The grid from 6:00AM-7:00AM will no longer be
lit.
KBP Series Manual
"TIMER
63