Publicité
Made
in
Germany
3
Technical information
3.1 Technical data
Load carrying capacity
Loading a lifting arm
Load distribution
Lift time
Lowering time
Standard operating volt-
age
Motor capacity
Motor speed
Noise level LpA
On-site connection
Optional energy set
i
Important information!
The lift is transferred without electrical connection
ready to the provided power supply, after a check of
function and safety. A plug connection must be pro-
vided on-site. This on-site located connection plug must
be located in the immediate vicinity of the lift and may
only be set at a height that can be reached without
any assistance (e.g. ladders). Otherwise a separate,
lockable main switch must be located in the immediate
vicinity of the lift that can be reached without assis-
tance.
82
5000 kg
A single load from only one
lifting arm may not happen
max. 3:1 or 1:3 or against
the drive-in direction
approx. 48 s
approx. 40 s
3~/N+PE,400 V, 50 Hz
2 x 1,5 kW
1420 rpm
≤ 70 dB
3~/N+PE, 400 V, 50 Hz
With fuse 16 Amp slow
blow
According to VDE regulation
Pneumatic connection> for
compressed air 6-10 bars
Socket: 220 V/50 Hz
3.2 Safety devices
• Safety mechanism for lift nut break
Check the lift nut with the integrated wear display.
• End switch by the electronic controls
Secure the lift against further extension of the lift rail
upwards or downwards.
• Electronic synchronisation monitoring
Secure against asynchronous running of the lift rails to
each other
• Lifting arm block
Secures the lifting arm against horizontal movement in
a lifted condition
• Capture hook
Secure against re-lifting after a lift nut break
• Reversing switch with curtain lock device
Fuse to prevent unauthorized use
• CE-STOP + acoustic warning signal
Secure against shear and crushing points in the foot
area
Optional:
• Foot bumpers on the lifting arms
Secure against shear and crushing points in the foot
area
OPI_SMART LIFT 2.50 SL_V4.0_DE-EN-FR-ES-IT
Publicité
