Publicité
2
System master sheet
2.1 Manufacturer
Nussbaum Automotive Lifts GmbH
Korker Straße 24
D-77694 Kehl-Bodersweier
2.2 Purpose
The lift is a lifting tool for raising vehicles with a total weight of in normal workshop operation at a maximum load
distribution of (1:3) in or against the drive-in direction A single load from only one or two lifting arms may not happen.
Set up of the standard lift in explosion and fire endangered workshops and humid spaces
(e.g. washing halls) is prohibited.
Lift operation is done directly on the operating column (see Data sheet).
After construction and maintenance changes on load carrying parts the lift must be inspected afterwards by a specialist
who approves the changes. If the set up location is changed, the lift must be checked again by a specialist and changed
approved.
OPI_SMART LIFT 2.50 SL_V4.0_DE-EN-FR-ES-IT
79
Publicité
