Publicité
Replacing Lightbulbs
•
Disconnect Pizza Oven at power source before replacing light bulbs.
•
The oil from your fingertips will reduce the life of the bulb. It is recommended to touch the bulb
as little as possible and to wipe the bulb with a cloth after handling with bare fingers.
To replace the halogen bulbs of your Pizza Oven you must first remove the lens from the light
housing. To remove the lens from the housing, remove the Philips screw securing the housing in
place. Snap the lens out of the housing (including the metal bracket). Reach in using your fingers
only, grip the two outside edges of the light bulb, do not grip the top or bottom of the bulb, as it
might break. Insert the new bulb using your clean cloth and gently snap it into position.
Begin by unplugging the Pizza Oven from
the power supply. Remove the screw
1
holding the light housing to the Pizza
Oven using a #2 Phillips screwdriver.
With the light cover removed pull the
1 3
halogen bulb out from light socket.
100w/12V
48
CAUTION
Carefully pull the housing out from Pizza
Oven, it will be attached by electrical
2
wire so do not pull hard. Remove the clip
holding the light cover to the main light.
housing.
Replace bulb by pushing straight into light
socket. Re-attach light cover, and
4
re-install housing repeating steps 2 and 3
in reverse order.
A
Publicité
