Publicité
Proper Burner Position and Operation
Adjusting the Airshutter valve - Bottom Burner
The burners are pre-tested and adjusted to achieve optimum performance at the factory. If
the burner's flames are not proper, the air shutter can be adjusted to achieve proper flame.
If the burner is not operating properly and not providing proper performance, refer to this
install instructions' troubleshooting and maintenance sections.
Lift up and remove the doors of the Pizza
1
Oven.
Loosen the screws and remove the stone
3
1
supports.
Loosen the two screws from the left side
5
of the burner plate to detach the ignitor
assembly from bottom burner.
Remove the middle baking stone (A) and
2
then both the side baking stones (B) and
(C).
Loosen the screw on the right side of the
4
bottom burner in the burner box.
Remove the burner. Loosen the screw
6
on the air shutter valve and turn the air
shutter valve to change the air opening.
(C)
(A)
(B)
41
Publicité
