Publicité
Assembling the Pizza Oven
•
Calculate the total BTU output of all equipment and refer to Gas Supply Line Runs for allowable
run distances for ¾ inch pipe. Failure to meet these minimum requirements may reduce
performance of the Pizza Oven and any other appliances running on that supply line.
•
Always keep supply line runs as short as possible.
•
A gas shut-off valve must be installed in an easily accessible location by a licensed gas fitter.
•
The outdoor cooking gas appliance and its individual shut-off valve must be disconnected from
the gas supply piping system during any pressure testing of that system at test pressures in
excess of 0.5 psi (3.5 kPa).
•
The outdoor cooking gas appliance must be isolated from the gas supply piping system by
closing its individual manual shut-off valve during any pressure testing of the gas supply piping
system at test pressures equal to or less than 1/2 psi (3.5 kPa).
•
Keep threading compound off of the first two pipe threads to avoid having any small pieces of
compound break loose and clog a burner valve or orifice. Do not use threading compound on
any flare fittings.
For built-in installations, it is recommended that any flexible pipe used be kept as short as possible.
For freestanding units using natural gas, NewAge strongly recommends using a quick disconnect
kit. This Quick Disconnect kit, is included with purchase.
Note:
This product must be installed by a licensed gas fitter when installed within the State of
Massachusetts.
This illustration is for reference only
each installation will be different.
Flexible Gas
PIZZA OVEN
Intake
Manifold
24
Threaded
Hose
nipple
Main shut-off valve
Threaded
nipple
Flexible
Quick
Gas Hose
Disconnect
Quick
Gas supply line
Disconnect
Coupler
from meter
Publicité
