Installing the Pizza Oven
Connect one end of Corrugated extension
hose to the manifold at the bottom and
1
other end to the natural gas hose from the
inside of the cabinet. Feed the Natural Gas
hose through cutout hole on back panel.
WARNING! The Pizza Oven and cabinet
must have a minimum clearance from
3
combustible materials. Refer to below
illustration for dimensions.
* The outdoor cooking gas appliance
shall not be used under overhead
combusible construction
Side - 14" Clearance
Rear - 18" Clearance
18 Inches
•
Never install this product into a combustible enclosure without an insulated jacket. Doing so
could result in fire, property damage and personal injury.
•
Never locate the Pizza Oven under a roof or overhang, in a building, garage, shed or other
such enclosed area.
•
Never locate the Pizza Oven under unprotected combustible construction.
•
Installation must conform with local codes or, in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2, in Canada.
2
Gas appliance shall not be used under overhead
combustible construction.
14 Inches
The Pizza Oven and cabinet must have a minimum
clearance from combustible materials.
Refer to the illustration for dimensions.
WARNING
Connect to Natural Gas supply using the
quick connect fitting.
Pull back collar on
connector
WARNING
Natural Gas Supply
25