Publicité
Safe Operating Practices
Don't push the electrical cable into Pizza Oven enclosure
For Pizza Oven Built-in
Do Not route the Cable from underneath the Pizza Oven.
Pizza Ovens are equipped with LED lighting on the control knobs and Oven's interior, powered by an
electrical cable on the rear of the unit. It's very important not to push any excess cable into the hole
at the back of the Pizza Oven.
The Pizza Oven enclosure gets extremely hot. Storing the cable in this manner can cause it to bunch
up and touch the underside of the burner box, which can melt the electrical cable and become a
serious hazard.
1. Locate the electrical cable on the back of your Pizza Oven.
2. Ensure the excess cable is not pushed into the hole at the back of the Pizza Oven and is fully
extended outside the Pizza Oven.
3. If the cable was inside the unit, pull the cable out and check for any damage on the cord.
4. If you notice that your cable is damaged, call Customer Support Team >
1-877-306-8930; or support@newageproducts.com
CAUTION
For Pizza Oven on NewAge Cabinets
11
Publicité
