Prohibited Use Of This Power Tool - Evolution RAGE5-S Instructions D'origine

www.evolutionpowertools.com
(1.9)
Symbol Description
V Volts
A Amperes
Hz Hertz
min
-1 Speed
~
Alternating Current
n o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Wear Safety Gloves
Read Instructions
CE Certification
EAC Certification
Triman - Waste Collection
& Recycling
Waste Electrical &
Electronic Equipment
Warning
Protection Class II
Double Insulated
(RCM) Regulatory Compliance Mark
for electrical and electronic equipment.
Australian/New Zealand Standard
ETL Certification
INTENDED USE OF
(1.10)
THIS POWER TOOL
WARNING: This product is a table saw and
has been designed to be used with special
Evolution blades. Only use accessories
designed for use in this machine and/or
those recommended specifically by
Evolution Power Tools Ltd.
When fitted with an appropriate blade
this machine can be used to cut:
Mild Steel (Max Thickness 6mm / 1/4")
Aluminium (Max Thickness 6mm / 1/4")
Wood and wood based materials
(Max Thickness 80mm)
Note: Cutting galvanised steel may reduce
blade life.
(1.11)

PROHIBITED USE OF THIS POWER TOOL

WARNING: This product is a table saw
and must only be used as such. It must not
be modified in any way, or used to power
any other equipment or drive any other
accessories other than those mentioned in this
instruction manual.
WARNING: This machine is not intended
(1.13)
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the machine by
a person responsible for their safety and who
is competent in its safe use.
Children should be supervised to ensure
that they do not have access to, and are
not allowed to play with, this machine.
5
EN