Intended Use Of This Power Tool; Prohibited Use Of This Power Tool; Safety Precautions; Electrical Safety - Evolution R185SMS Instructions Originales

Symbol Description
Wear Ear Protection
Do Not Touch,
Keep hands away
Wear Dust Protection
Wear Hand Protection
CE certification
Waste electrical and
electronic equipment
Read Manual
WARNING
Laser Warning
Double Insulation Protection
Fuse
Triman - Waste Collection
& Recycling
INTENDED USE OF
THIS POWER TOOL
WARNING: This product is a Multi-material sliding
mitre saw and has been designed to be used with
genuine Evolution blades rated for this machine.
Only use blades designed for use in this machine
and/or those recommended specifically by
Evolution Power Tools Ltd.
WHEN FITTED WITH A CORRECT
BLADE THIS MACHINE CAN BE USED
TO CUT:
• Wood, Wood derived products (MDF, Chipboard,
Plywood, Blockboard, Hardboard etc),
• Wood with nails,
• 50mm mild steel box section with 3mm wall at
HB 200-220,
• 6mm mild steel plate at HB 200-220.
Note: Wood containing non galvanised nails or
screws, with care, can be safely cut.
Note: Not recommended for cutting galvanised
materials or wood with embedded galvanised nails.
Cutting galvanised steel may reduce blade life.
www.evolutionpowertools.com
PROHIBITED USE
OF THIS POWER TOOL
WARNING: This product is a Multi-material
sliding mitre saw and must only be used as such.
It must not be modified in any way, or used to
power any other equipment or drive any other
accessories other than those mentioned in this
Instruction Manual.
WARNING: This product is not intended
(1.13)
for use by persons (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning the safe use of the product by a
person responsible for their safety and who is
competent in its safe use.

SAFETY PRECAUTIONS

ELECTRICAL SAFETY

(1.14)
This machine is fitted with the correct moulded
plug and mains lead for the designated market. If
the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturers or its service agent.

OUTDOOR USE

(1.15)
WARNING: For your protection if this tool is to be
used outdoors it should not be exposed to rain,
or used in damp locations. Do not place the tool
on damp surfaces. Use a clean, dry workbench
if available. For added protection use a residual
current device (R.C.D.) that will interrupt the
supply if the leakage current to earth exceeds
30mA for 30ms. Always check the operation of
the residual current device (R.C.D.) before using
the machine. If an extension cable is required it
must be a suitable type for use outdoors and so
labelled. The manufacturers instructions should
be followed when using an extension cable.
POWER TOOL GENERAL
(2.1)
SAFETY INSTRUCTIONS
WARNING: When using electric tools basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
personal injury including the following.
Note: This power tool should not be powered on
continuously for a long time.
6