4 Storage, Maintenance and Disposal
The end of service time of particle filters or the particle filter part of combined filters, most of the time can be noticed
by an increase in breathing resistance. The filter must then be replaced. Particle filters that have been used against
radio active substances, micro organisms or biochemically active substances must only be used once!
4
Storage, Maintenance and Disposal
For disposal of filters applicable National Regulations must be observed.
4.1
Half Mask
Clean and disinfect half mask after every use. To clean the half mask remove the filters (cleaning
Cleaning
the filters is not possible). Use a mild detergent in lukewarm water and rinse with clear water and
and Care:
dry air (max. 50 °C).
Spare
Spare parts are not provided.
parts:
Only undamaged half mask must be stored for further use. When not in use, store respiratory
Storage:
protective device in cool, dry and clean ambient air.
The manufacturing date of the half mask is marked inside. Example (see
Shelf life:
date April 2006
4.2
Filter
Filter
Factory sealed gas or combined filters:
Opened gas or combined filters that are to be reused:
Factory sealed particle filters:
Particle filters that have been used against radio active
substances, micro organisms or bio chemically active
substances:
Factory sealed and properly stored MSA respiratory filters are maintenance free.
5
Ordering Information
5.1
Half Mask
Description
Advantage 200 S (small)
Advantage 200 M (medium)
Advantage 200 L (large)
8
Figure 7
Proper Storage
•
–5 to 50 °C, max. 90 % relative humidity for
long-term storage
•
Storage life: See information on the filters
(pictogram "Hourglass")
•
In a closed plastic bag
•
+5 to 35 °C, max. 60 % relative humidity
•
Storage life: replace 6 months after first use
at the latest!
•
–5 to +50 °C, max. 90 % relative air
humidity (see pictograms)
•
Storage life: See information on the filters
(pictogram "Hourglass")
•
Single use only, do not reuse! No further
storage.
Part No.
430357
430356
430358
): Manufacturing
GB