Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions - Door Panels - French Door Models
HARDWARE SUPPLIED (per unit)
48 Phillips #6 Wood Screws*
Socket Head Screws
* Used for Custom Panels only.
Use M4 machine screws for
stainless steel panels (included in
16 Panel Brackets
door panel kit).
ACCESSORIES/KITS
ZK4SN360VSS
French Door Stainless Steel door
panel kit
HANDLE DESIGN GUIDE (CUSTOM PANEL MODELS ONLY)
Custom Panels require a custom handle from a cabinet
maker or the use of the ZKPN - Handle Mounting
Kit (sold separately) if you are using the Monogram
Statement or Minimalist handles (sold separately).
For custom handle installation, counter-bore holes in rear
of decorative panels. Ensure 1/2" (1.27cm) material thick-
ness remains for handle support.
NOTE: The counter-bore must not exceed 1" (2.54 cm) in
diameter.
1/4"
(0.64cm)
3/4"
(1.91cm)
31-1000708 Rev. 4
16 M6 Allen Hex
6 Small Washers
1/2"
(1.27cm)
16 M5 Horizontal
Adjustment Screws
6 M5 Vertical Adjustment Screws
M5 Allen Wrench
32 Large Washers
ZKSB4H4CVSS Minimalist handle kit (French Door)
ZKSB4H4PVSS
Minimum distance from
panel side edge to handle
center should be 1-1/2"
(3.81 cm) as shown.
65
10 Door Trims
20 Trim Caps
2 H1/J1 Shims
M4 Allen Wrench
Statement handle kit (French Door)
Hinge
Side
1-1/2"
Handle
Side
Publicité
