Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions - Dual Integrated Installation
STEP 5 JOINING DUAL INSTALLED UNITS
TOP UNIFICATION
Loosen the middle two screws, remove the two rear
screws.
Assemble the bracket to the middle screws and
reassemble the rear screws.
Tighten screws to tie units together.
Unification
Bracket
Front of appliances
BOTTOM BACK UNIFICATION
Loosen the two bottom screws of rear access covers of
both units and remove the top screws.
Hang the unification bracket to the bottom screws and
reassemble the screws at the top
Tighten screws to tie units together.
Bracket
52
BOTTOM FRONT UNIFICATION
Install the bottom front unification bracket using a 3/8"
driver (4 screws).
31-1000708 Rev. 4
Publicité
