Télécharger Imprimer la page

Salicru SLC CUBE 4 7.5 kVA Mode D'emploi page 141

Publicité

Les langues disponibles

Les langues disponibles

13. ANNEX IV. CONNECTIVITY
INimbus Service in the cloud.
The UPS of the SLC CUBE4 series incorporate, as standard, the
NIMBUS communication card. This allows, by connecting this
card via Ethernet, a multitude of IoT ("Internet of Things") communi-
cation possibilities, ranging from remote diagnosis, remote mainte-
nance, integration into SNMP platforms, MODBUS/TCP protocol,
orderly shutdown of servers and/or remote firmware updates of
the NIMBUS card.
Remote diagnostics
The equipment data can be displayed on the website embedded
in the card itself, and can also be uploaded to the SALICRU web
platform. In this platform, the user has the possibility to view the
status of the equipment without having to be on the same net-
work, as well as remotely update the cards, view the location of
the equipment and personalize notifications via SMS and email in
the event of an alarm.
Fig. 67. Remote monitoring system and direct notifications to
the Technical Service, response time is minimized to the
maximum.
To know if the unit is connected and sending data to the cloud, the
following icon should appear on the right at the top of the screen:
Otherwise, the following icon will appear:
The reasons why a unit may not be connected are as follows:
USER MANUAL
The card is not correctly connected to the network.
The network to which the card is connected does not have In-
ternet access.
13.1. REGISTRATION OF THE UNIT IN THE
CLOUD
There are two ways of registering the unit in the cloud, via the
portal or by reading a QR code.
13.1.1. Nimbus portal
Access the following link: https://nimbus.salicru.com/
1.
If you are not yet registered, click on "Create an account" and
2.
follow the process to create it.
Once the account has been created and accessed, the unit
3.
must be added by pressing the "+" button in the top right-hand
corner of the "Device" tab.
A page will appear where the fields that are displayed must be
4.
completed. Note: required fields are marked with an asterisk
(*).
S A L I C R U
After registering the unit, a list of all units linked to that ac-
5.
count will be shown, as well as the UPS status.
SLC CUBE4 7,5 kVA a 20 kVA - UNINTERRUPTIBLE POWER SOIRCE (UPS)-
141

Publicité

loading

Ce manuel est également adapté pour:

Slc cube 4 10 kvaSlc cube 4 15 kvaSlc cube 4 20 kva