7.8.3. UPS event table
As a complement to the system alarms, the unit's "Log" is capable
of recording events that do not involve any type of alarm.
Tab. 14 shows the possible (non-alarm) event messages in the log
and their brief descriptions.
EVENT
TYPE
PowerOn Mode
Standby Mode
Bypass Mode
Line Mode
BATT Test Mode
Operating
Battery Test
Mode
Fault Mode
Converter Mode
ECO Mode
Shutdown Mode
SelfTest Mode
Turn On UPS
Turn Off UPS
BATT Test On
BATT Test Off
Control
Mute All
Cancel Mute All
Turn On Charger
Turn Off Charger
Language
Input Source
All Mute
Mute Mode
Output VOL
Output Rated FRE
CVCF Mode
Bypass Forbid
Bypass UPS Off
Bypass VOL Range Low
Bypass VOL Range High
Setting
Bypass FRE Range Low
Bypass FRE Range High
ECO Mode
ECO VOL Range Low
ECO VOL Range High
ECO FRE Range Low
ECO FRE Range High
BATT Warning VOL High
BATT Warning VOL Low
Shutdown VOL
Shutdown Delay Min
Restore Delay Min
126
MESSAGE ON-SCREEN (Log)
DESCRIPTION
UPS starting up.
UPS in standby mode (there is no output).
UPS in bypass mode.
UPS in normal mode, output in inverter.
UPS in autonomy or battery mode.
UPS in battery test mode.
UPS in fault mode.
UPS in frequency converter mode.
UPS in ECO mode.
UPS shutting down.
UPS in auto-test mode.
The inverter has been turned on.
The inverter has been turned off.
The battery test has been activated.
The battery test has been cancelled.
The acoustic alarm has been muted in total mode.
The acoustic alarm has been enabled.
The charger has been turned on.
The charger has been turned off.
Language setting
Input source setting
Mute all mode setting
Mute mode setting
Output voltage setting
Output frequency setting
Frequency converter mode has been enabled/disabled
Prohibited bypass function has been enabled/disabled
Bypass has been enabled/disabled when the UPS is off
Bypass voltage lower range setting
Bypass voltage upper range setting
Bypass frequency voltage lower range setting
Bypass frequency voltage upper range setting
ECO mode has been enabled/disabled
ECO voltage lower range setting
ECO voltage upper range setting
ECO mode frequency lower range setting
ECO mode frequency upper range setting
High battery voltage level warning setting
Low battery voltage level warning setting
End of autonomy cut-off level due to low battery voltage setting
Off time setting
On time setting
SALICRU