Salicru SLC CUBE 4 7.5 kVA Mode D'emploi page 116

7.4. SETTINGS MENU
This menu provides access to the system configuration and set-
tings. Press the
There are 2 options: General and Advanced.
10 kVA
Line Mode
GENERAL
PASSWORD
ADVANCE
Password remain
time
HOME CONTROL
Not all settings are available in all operating modes (see
""10. Annex I. SETTINGS AND OPERATING MODES"). If the
setting is not available in the present mode, the LCD screen informs
that in the current operating mode it cannot be activated.
7.4.1. GENERAL configuration
10 kVA
Line Mode
Date/Time
Language
GENERAL
Input source
ADVANCE
Service Contact
Service Phone
Service Mail
CONTROL
HOME
116
icon to enter the configuration menu page.
0
Min.
MEASURE SETTING INFO
14 : 24 : 53
Spanish
Generator
TSS SALICRU
34938482401
SST@SALICRU.COM
MEASURE SETTING INFO
GENERAL: it is to configure the basic information of the UPS. It
•
2020.11.04
is not related to any function parameter.
11:56:35
ADVANCE: the password must be entered in order to access
•
the "ADVANCED" configuration. There are two types of au-
thority here, User and Maintainer.
The default password at the advanced user level is 1234.
DATALOG
Date/Time: time setting (HH:MM:SS).
•
2020.11.04
Drop-down numeric keypad when pressing each field.
11:56:35
Language: set the language of the LCD screen. There are four
•
languages: English, Spanish*, Portuguese and French.
Input source: it lets you choose between two sources: Line*
•
and Generator. When "Generator" is selected, the acceptable
input frequency will be set in the range of 40 to 75 Hz. It can only
be adjusted in the "Bypass" and "Standby" operating modes.
Service Contact: it lets you establish the name of the mainte-
•
nance person. The maximum length is 18 characters.
DATALOG
Service Phone: it lets you enter the telephone number of the
•
maintenance person. The maximum length is 14 characters.
Service Mail: it lets you enter the email address of the mainte-
•
nance person. The maximum length is 18 characters.
Audio Alarm: there are two mute modes available: to mute
•
the acoustic alarm:
All Mute: when enabled, the alarm, including warnings and
ˆ
alarms, is muted. The
corner of the main screen.
Mode Mute: it only deactivates the bypass mode and bat-
ˆ
tery mode acoustic alarm. If activated, the
shown in the upper right corner of the main screen.
summarises the events that can be muted in each mode.
*values set by default.
icon is shown in the upper right
icon will be
SALICRU