Salicru SLC CUBE 4 7.5 kVA Mode D'emploi page 136

11. ANNEX II. DETAILS OF
CONNECTION TERMINALS AND
CONNECTIONS FOR ALL INPUT-
OUTPUT CONFIGURATIONS
AVAILABLE
The following figures show the configuration of the connection
terminals and their connections for the different input-output con-
figurations available
rectifier (standard model) or with a separate bypass input.
(*)Except for the standard three-phase/three-phase configuration, with or
without a separate bypass line, which has already been considered in sections
5.2.1 and 5.2.2.
Although SLC CUBE4 series 7.5-20 kVA units are configur-
able as the input and output type, any modification by the
customer or user is restricted, as in addition to modifications to the
connection strip, it is necessary to make changes via the password-
restricted screen that is exclusively reserved for the T.S.S. or au-
thorised distributors.
Tower version equipment:
Three-phase/single-phase input/output
with independent bypass line.
Rack version equipment:
Three-phase/single-phase input/output
with independent bypass line.
136
, with a bypass with common supply to the
(*)
Input/Output Single-phase/single-phase
Input/Output Single-phase/single-phase
with common bypass line.
with common bypass line.
Single-phase/single-phase input/output
with independent bypass line.
Single-phase/single-phase input/output
with independent bypass line.
SALICRU