Salicru SLC CUBE 4 7.5 kVA Mode D'emploi page 120

7.5. INFO MENU
Touch the icon to consult basic information on the system
and settings. This is divided into 3 ranges: Basic, Nominal and Pa-
rameters.
10 kVA
Bypass Mode
MCU Version
DSP Version
BASIC
Serial NO.
RATED
Model Name
Manufacturer
PARAMETER
Service Contact
Service Phone
HOME CONTROL
120
COMM: 3329.00.02 LCD: 3330.00.05
INV: 2767.10.00 PFC: 2766.09.00
00000000000000
SLC-10-CUBE4
SALICRU, S.A.
TSS SALICRU
34938482401
MEASURE SETTING INFO
2020.11.04
BASIC:
11:56:35
This information may be relevant for qualified technical staff in case
of anomalous behaviour or the need to update.
MCU Version: communications and LCD firmware version.
•
DSP Version: inverter and PFC firmware version.
•
Serial NO: UPS serial number.
•
Model Name: UPS model name.
•
Manufacturer: SALICRU S.A.
•
DATALOG
Service Contact: Technical Service contact name.
•
Service Phone: Technical Service telephone number.
•
Service Mail: Technical Service email.
•
PAR Status: parallel or single UPS configuration.
•
PAR ID: number that identifies the unit within the parallel
•
system.
Customer Code: it lets you view the customer code in case the
•
dynamic password is enabled. If it is disabled (default value), the
code is 0000000.
Dynamic Password: enabled/disabled. It lets you see whether
•
the dynamic password is enabled or disabled.
RATED:
The nominal values the UPS is configured with are in this menu. De-
pending on the user role on the control panel, some of these param-
eters can be modified, accessing with a username and password via
the ADVANCED submenu in the Settings menu.
In any case, the read-only display will always be available to any
user.
Output VOL: it shows the nominal output voltage.
•
Output FRE: it shows the nominal output frequency.
•
CVCF Mode: it shows whether the CVCF mode is enabled/
•
disabled.
Bypass Forbid: it shows whether the bypass function is ena-
•
bled/disabled.
Bypass UPS Off: it shows whether the unit has the unit in by-
•
pass function enabled/disabled when the UPS is off.
Auto Restart: it shows whether the automatic restart function
•
is enabled/disabled.
ECO Mode: ECO mode enabled/disabled.
•
SALICRU