Salicru SLC CUBE 4 7.5 kVA Mode D'emploi page 105


Fig. 48. Insertion and fixing of the UPS in the rack cabinet.
Mounting the battery modules.
2.

Fig. 49. Necessary material: guides and screws.

Fig. 50. Mounting the guides in the rack cabinet.

Fig. 51. Mounting the rack supports on the battery modules.
USER MANUAL

Fig. 52. Mounting the rack supports on the battery modules.
5.2.6. Instalación de tarjetas SNMP.
All SLC CUBE4 devices have as standard one (1) slots located on
the back of the device (identified as "Smart Slot", tower version, rack
version (*), Fig. 4), suitable for installing a card. communications,
SNMP or any other expansion card for communications, signaling
and/or other services. By default, the NIMBUS communications
card (**) is supplied, which enables access to SALICRU's
proprietary "cloud" services.
The rack version has 2 "Smart Slots", one with the NIMBUS
(*)
card installed and the other free.
See specific manual for the NIMBUS EL139*00 card
(**)
for a detailed description of the services offered and their
configuration.
To install the SNMP card or another optional addition in the intel-
ligent slot, proceed as follows:
Remove the fixing screws from the slot cover and the part as
1.
a cover.
Install the NIMBUS, SNMP card or another option in the slot
2.
and secure it using the screws.
Make the relevant connections.
3.
Fit the protective cover for the communication connections and
4.
the fixing screws.
SLC CUBE4 7,5 kVA a 20 kVA - UNINTERRUPTIBLE POWER SOIRCE (UPS)-
105