Publicité
Les langues disponibles
Les langues disponibles
7.1.1. Contents of the main screen information
The information on the main screen consists of:
Power of the unit.
1.
Operating mode.
2.
The different operating modes are as follows:
PowerOn Mode.
ˆ
Standby Mode.
ˆ
Bypass Mode.
ˆ
Line Mode.
ˆ
Battery Mode
ˆ
Battery Test.
ˆ
Fault Mode.
ˆ
CVCF Mode.
ˆ
ECO Mode.
ˆ
Shutdown Mode.
ˆ
SelfTest Mode.
ˆ
Nimbus Services communication
3.
Acoustic alarm status
4.
Silent mode (Mute Mode).
Total mute mode (Mute All).
Date and time
5.
Phase-neutral bypass voltage measurement.
6.
Bypass frequency measurement.
7.
Phase-neutral input voltage measurement.
8.
7.1.2. Map of screens from the main screen
Fig. 62. Screen menu tree.
114
CONTROL
MEASURE
SETTING
HOME
INFO
DATA LOG
Input frequency measurement.
9.
Battery charge capacity.
10.
Battery + and - voltage.
11.
Battery capacity Ah.
12.
Phase-neutral output voltage measurement.
13.
Output frequency measurement.
14.
Total output load percentage measurement.
15.
UPS synoptic diagram with the following power blocks repre-
16.
sented:
Static bypass.
a.
Rectifier.
b.
Inverter.
c.
Batteries.
a.
All power blocks can be represented with two statuses:
GREY: Not operating
ˆ
Flashing YELLOW/GREEN: Operating.
ˆ
Load:
ˆ
Grey: There is no output
Green-red: different level of charge from 0% to 100%.
25% per colour.
Power flow between the different power blocks of the UPS.
17.
A representation of the dynamic power flow (via moving blue
areas), will detail the UPS operating mode: normal mode, by-
pass mode, battery mode, etc.
ON/OFF UPS
BATT TEST
MUTE ALL
EXIT PARALLEL
MEASURE 1
MEASURE 2
MEASURE 3
BASIC 1
GENERAL
BASIC 2
USER PASSWORD:1234
ADVANCE
MAINTENANCE PASSWORD
BASIC
RATED
PARAMETER
ELECTRIC
BATT
MISCELLANEOUS
SALICRU
Publicité
