Fitting The Brushes - Numatic TTV678-300 Mode D'emploi

Fitting the brushes

Fig.15
Featuring the new OBS (Octagonal Brush System);
the brushes simply push-fit up onto the chucks
making fitting and removal a simple process.
Pull the side pod adjustment lever and set to the top position (fig 15).
The side pod will now pull open (fig 16).
Fit middle brush first (brushes will click-fit onto the OBS drive chuck)
Fit outer brush next on both sides.
Close side pod and while keeping the side pod pushed in, set to
appropriate width (see setting the width) (fig.17)
Safety gloves are recommended for the changing of used brushes.
Owning the TTV-678 ride on scrubber dryer is like having 3 machines in one.
With three width-settings the operator can quickly adapt the machine to any cleaning situation;
without the need for any tools. The machine can be set to clean anything from a narrow corridor to
a large warehouse. The TTV-678 is a totally versatile machine.
12
Fig.16
235670 02/12 (A09)
Fig.17