Fitting The Brushes - Numatic TTV 678G / 300T Notice Originale

Machine Set-Up

Fitting the Brushes

16
14 15
Featuring the OBS (Octagonal Brush System);
the brushes simply push-fit up onto the chucks
making fitting and removal a simple process.
Pull the side pod adjustment lever and set to the top position (Fig.14).
The side pod will now pull open (Fig.15).
Fit middle brush first (brushes will click-fit onto the OBS drive chuck).
Fit outer brush next on both sides.
Close side pod and while keeping the side pod pushed in,set to appropriate width
(see setting the width) (Fig.16).
Safety gloves are recommended for the changing of used brushes.
Owning the TTV 678 ride-on scrubber dryer is like having 3 machines in one.
With three width settings the operator can quickly adapt the machine to any cleaning situation; without the
need for any tools. The machine can be set to clean anything from a narrow corridor to a large warehouse.
The TTV 678 is a totally versatile machine.
26
www.numatic.co.uk