Machine Setup; Fitting The Brushes - Numatic TT 516 Mode D'emploi

Tipping the Machine

Fitting the brushes

Featuring the Nulock brush system.
The brush is fitted simply by pushing and twisting to lock in place, making fitting and removal a simple
process.
Only use manufacturer supplied brushes.
This machine requires a 16" brush or a 16"pad.
Safety gloves are recommended for the changing of used brushes.
0
Gall
Slide the brush / pad under the brush deck (Fig 6).
Fig 6
Fit the brush / pad onto the Nulock drive chuck, twist to lock
the brush / pad in place (Fig 7).
Fig 7
0
4
Machine Set-Up
2
Min
Gall
Gall