Adjusting The Seat; Setting The Cleaning Controls; Sitz Einstellen; Reinigungssteuerung Einstellen - Numatic TTV678-300 Mode D'emploi

Adjusting the seat

1
Sitting in the driving position, adjust the seat forwards or backwards as necessary by using the lever
found on the left-hand side (see fig.32).
Note: The seat is fitted with a pressure sensor that disables the machine until an operator is seated.

Setting the cleaning controls

2
22
Fig.32
Insert the key into the ignition and quarter-turn it clockwise to the 'ON' position.
The battery charge-level indicator will illuminate.
Set automatic Chemical Dosing Mix as required, depending on floor type
and level of soiling.
Set desired Brush Speed as required, depending on floor type and level of soiling.
Set Water Flow Rate as required, depending on floor type and level of soiling
235670 02/12 (A09)