Breakaway Floor-Tool Feature; Off-Aisle Cleaning Kit ( Optional ); Abreißen Des Abstreifers; Seitlich Versetztes Reinigungskit - Numatic TTV678-300 Mode D'emploi

Breakaway floor-tool
Fig.38
Fig.39
Off-Aisle Cleaning Kit (Optional Extra Accessory)606182
Fig.40
Fig.41
28
The floor-tool design incorporates a breakaway feature allowing it to safely
disengage from its mounting should it become caught on an obstruction.
(See fig.38)
To attach the blade to its holder, first loosen the retaining knobs on the floor-tool body
and slide onto the holding bracket.
Tighten retaining knobs to finger tight. (See fig.39)
The optional off-aisle cleaning kit gives added flexibility to the operator. The kit can be
used to clean hard to reach/inaccessible areas.
Press the blue auxiliary switch on the dashboard (see fig.40); ensure the floor tool is in
the lowered position (see fig.41) so only the vacuum will operate and all other
functions on the machine will become disabled.
If floor-tool is in the raised position the vacuum will not operate and the control panel
lights will flash. The machine will need to be reset by simply turning the ignition key off
and on again.
235670 02/12 (A09)
Off-Aisle Accessory Kit
(Optional) (606182)